However, the part's compatibility with an aircraft remains the installer's responsibility.
Specific and rotable parts | |
Tested, overhauled, repaired | |
Aicraft registered in Europe | |
Part certified in Europa | Parts certified in USA |
EASA FORM 1 | FAA Form 8130-3 Dual Release EASA |
Aicraft registered in USA | |
Part certified in Europa | Parts certified in USA |
FAA Form 8130-3 Dual Release EASA | FAA Form 8130-3 |
New | |
Aicraft registered in USA | |
Part certified in Europa or USA | |
FAA Form 8130-3 NEW EASA Form 1 NEW | |
Standard parts and new consumables | |
Aicraft registered in USA | |
Part certified in Europa or USA | |
Conformity certificate |
Specific and rotable parts | Standard parts and new consumables | |||
Tested, overhauled, repaired | New | |||
Aicraft registered in Europe | Part certified in Europa | EASA Form 1 | FAA Form 8130-3 NEW EASA Form 1 NEW |
Conformity certificate |
Part certified in USA | FAA Form 8130-3 Dual Release EASA | |||
Aicraft registered in USA | Parts certified in Europe | FAA Form 8130-3 Dual Release EASA | ||
Part certified in USA | FAA Form 8130-3 |
"EASA Form 1" certifies the part's compliance with the EASA-approved design. When the "EASA Form 1" is "Dual Release FAA," it also certifies the part's compliance with the FAA-approved design.
Only European "EASA Part145" MRO shops and manufacturers can issue the "EASA Form 1".
In order to issue the "Dual Release FAA" version, these MRO shops must also be "FAA Part 145" approved.
"FAA Form 8130-3 Single Release" certifies the part's compliance with the FAA-approved design.
"FAA Form 8130-3 Dual Release EASA" certifies the part's compliance with the design approved by both the FAA and EASA.
Only US-based "FAA Part 145" MRO shops and manufacturers can issue the "FAA 8130-3".
To issue the "Dual EASA Release" version, these workshops must also be certified "EASA Part 145".
The "Certificate of Conformity Manufacturer" certifies that the product perform with its specifications.
The "Certificate of Conformity Retailer" indicates the traceability of the part.
The "Certificate of Conformity Manufacturer" is only delivered by the manufacturer.
However, the "Certificate of Conformity Retailer" is delivered by the reseller.
Parts with an individual Part Number (P/N) and Serial Number (S/N).
These parts may be overhauled or repaired in order to increase their lifetime.
Spare parts which fulfill with a national/international standard.
A part is not "standard" if it is used in a critical application.
The consumable are products as lubricants, sealants, coatings, adhesives, paints, chemicals.
KRISTAL.aero performs a systematic visual check of the condition and airworthiness of each part.
For all orders, you will receive a certified copy.
For specific and rotable parts, the part is shipped with the original certificate of airworthiness.
To ensure optimal traceability, we keep an electronic copy of the certificates for each part. You can download them directly from your customer account.
Our partner-workshops in the USA are certified by both the FAA and EASA, while our European partner workshops are at least EASA Part 145 approved.
Our extensive network of maintenance workshops allows us to repair or revise your navigation instruments at the best price.